Ge tapt smart wall switch1/25/2024 ![]() This configuration never turns on power to load line. This is similar to the Smart Configuration, but without power always on. None - Use this when a light load is not wired to Tapt. There is no dimming to the wired standard light, but dimming works on smart lights. Like the Smart Configuration, you can add smart bulbs/groups. The Tapt switch has a red, black, white and green wire. If the photos dont work, my best description would be that there are 2 black wires connected to the existing switch, 2 more white wires that are paired together, and finally 2 bare ground wires. Use “Tapt Light” in the “Lights + Power” section of the Wink app to turn the light on/off. Make your life smart with the in-wall GE my TouchSmart Wi-Fi Smart Switch. Here are a few photos of the wiring as well as the wires on the back of the smart switch. Also, the lights wired to Tapt can be turned on/off in the Wink app. Tactile on/off switches control the light load wired to Tapt, switching the power to the light on/off, just like a normal switch. The GE 14285 is a highly innovative smart switch that works on par with other high-end products with ease. Dimming levels can be set in the Wink app - go to Tapt settings and tap “dimmer settings." Default Configuration - This should be used when you have a standard bulb, or light fixture with standard bulbs, wired to Tapt. You can add additional smart bulbs and groups in the Wink app - go to Tapt settings and tap on “assign lights.” You can dim the smart bulbs/groups by holding the top or bottom button to dim up or down. Tactile on/off switches control the smart bulb wired to Tapt, turning the smart bulb on and off without cutting power to the bulb. In this configuration, the power is always on. Smart Configuration - This should be used when you have a smart bulb, or light fixture with multiple smart bulbs, wired to Tapt.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |